Roofing Contractor in Rhinelander, WI

Rhinelander sits in a pocket that collects snow and holds it. North-facing slopes here can stay loaded from December into April, and every warm afternoon followed by a hard freeze pushes meltwater under the shingles at the eave. That's why the single most common call we get from Rhinelander homeowners is a February ceiling stain on a roof that looked perfectly fine in October.

The older housing stock around downtown and Hodag Park often has 1x board decking, shallow attic insulation, and soffit vents that were painted or blown shut years ago. Shingles are the symptom in those houses — heat loss is the disease. We correct intake and ridge ventilation, address insulation depth, and run ice-and-water shield well past the warm wall line so the problem stops repeating.

Out toward Boom Lake, Lake George, and Thunder Lake it's a different fight: taller pines dropping needles into every valley, shade that grows algae streaks on asphalt, and steeper cabin pitches that need staging and harnesses. Those are the roofs where standing-seam metal earns its price.

Most Rhinelander homes run 1,500 to 2,400 square feet of roof area. An architectural asphalt system on a walkable pitch generally lands in the more affordable end of the range; a steep lake home with multiple valleys, dormers, and a wraparound porch is a very different number. Standing-seam metal typically runs two to three times asphalt upfront and roughly fifty years of service.

What actually moves the price: pitch and access, how many layers come off, the condition of the decking once we can see it, the number of penetrations to flash, and whether ventilation has to be corrected. We measure the roof, photograph it, and hand you a written estimate with the exact scope of work, priced for the system you request with a metal comparison available on request. No phone guesses, no sign-today discount.